CANON ix5000

Untuk reset Pixma ix5000


Service mode operation procedures

1) With the printer power turned off, while pressing the Resume/Cancel button,
press and hold the Power button. (DO NOT release the

buttons. The Power LED lights in green to indicate that a function is selectable.)

2) While holding the Power button, release the Resume/Cancel button.
(DO NOT release the Power button.)

3) While holding the Power button, press the Resume/Cancel button 2 times,
and then release both the Power and Resume/Cancel buttons.

(Each time the Resume/Cancel button is pressed, the Alarm and Power LEDs
light alternately, Alarm in orange and Power in green,

starting with Alarm LED.)

4) When the Power LED lights in green*1, press the Resume/Cancel button
the specified number of time(s) according to the function listed in

the table below. (Each time the Resume/Cancel button is pressed,
the Alarm and Power LEDs light alternately, Alarm in orange and Power

in green, starting with Alarm LED.)

Time(s) LED indication Function Remarks
0 times Green (Power) Power off
1 time Orange (Alarm) Service test print
2 times Green (Power) EEPROM information print
3 times Orange (Alarm) EEPROM initialization
4 times Green (Power) Waste ink counter resetting
5 times Orange (Alarm) Destination settings
6 times Green (Power) Print head deep cleaning (Cleaning of both black and color)
7 times Orange (Alarm) Reserved
8 to 13 times Green at even numbers (Power)
Orange at odd numbers (Alarm)
Return to the menu selection

14 times Green (Power) Reserved
15 to 21 times*2 Green at even numbers (Power)
Orange at odd numbers (Alarm)
Return to the menu selection

*1: If the LED does not light in green (the printer does not enter the service mode), disconnect the power cord and plug it again. Then start from step 1) to start the printer in the service mode again.

If the automatic power-on function is enabled in the printer, the printer enters the service mode for the first time, but it will never enter the service mode if the printer is turned off by the Power button. This is because the printer remains to be turned on internally if the power is turned off by the Power button. To prevent this, disconnection of the power cord is required before starting the printer in the service mode.

*2: If the Resume/Cancel button is pressed 22 or more times, the Alarm or Power LED lights steadily without any changes.

Kejadia diatas, dilatar belakangi ketika hasil cetakan tidak rampung, baru tengah-tengah terus berhenti .. nah aku bawa ke servpis center Canon.. Lhadalah ... sampai sana di cek .. ternyata fine-fine saja .. dengan rodo clingus .. ku bawa pulang lagi .. Lha wong di sana, untuk nyetak foto bisa, word bisa .. test page bisa ...

Akhirnya kuganti dengan PC yang laen .. baik-baik saja ..

aku gak tau knapa tuh PC koq bisa begitu ...